国产99久久久久久免费看,CAOPORN国产精品免费视频,狠狠色噜噜狠狠狠狠97首创麻豆,中文字幕无码毛片免费看

Welcome to Shenzhen Zhongyuan Plastic Co., Ltd!

News



Tel:(0755)27151698
Fax:(0755)27150611
Mailbox:szzyzcl@163.com / szzy@szzy99.com
Add:Building A1 and A2, No.1 Industrial Zone, yuliu property company, Gongming town, Bao'an District, Shenzhen
Industry information

當(dāng)前位置:

首頁 News Industry information

What is the basic principle of injection molding

Release time:2022-01-24

Omnidirectional injection molding is to inject the plastic melt into the middle of the closed mold cavity under high pressure, and then heat it to solidify, so as to obtain the plastic product exactly the same as the mold cavity. The following is a detailed explanation of the basic views of large and medium-sized injection molding!


Plastic deformation and melting: in the middle of the whole injection molding process, the solid plastic rises through the torsion screw, moves along the direction of the groove, and passes through the heating, tamping, in-situ stress and mixing heating of the outer rib. It has become a refreshing liquid plastic melt, with symmetrical relative density, viscosity and composition, and stable source.


Injection molding: the volume of molten plastic melt is stored in the storage area of the barrel, and the screw rolls along the axis in the middle of the whole injection molding process. Under the working pressure injected by the screw, the plastic melt passes through the cylinder section at an inevitable speed. Use the die forging system software to inject the front-end nozzle into the middle of the die cavity.


The whole refrigeration and freezing process: the plastic melt injected into the mold cavity fills the mold cavity, so the resistance of various behavior conflicts is removed. In addition, the plastic melt in the middle of the inner cavity is under great working pressure from the inner cavity, which promotes the behavior of the plastic melt. Back to the development trend of the barrel, due to the actual result of cavity cooling, the plastic melt is heated and expanded. At this time, take the screw to get the working pressure. For this reason, add plastic melt in the middle of the inner cavity, so don't move. The mold cavity is moderately supplemented with plastic deformation and melting. The behavior subject closes the indoor space in the middle of the inner cavity until the plastic melt is gradually heated and frozen into commodities.


The structure of injection mold and plastic transfer mold is complex, and there are many parts that make up this kind of mold.


Basic parts include:

① Formed parts, including female dies, male dies and various formed cores, are parts of the inner and outer surfaces or upper and lower end faces, side holes, side recesses and threads of the formed finished products.

② Supporting and fixing parts, including die base plate, fixing plate, supporting plate, cushion block, etc., are used to fix the die or support the pressure.

③ Guide parts, including guide posts and guide sleeves, are used to determine the comparative position of the action of the die or ejection mechanism.

④ Core pulling parts, including inclined pins, sliders, etc., are used to pull out the bearing core when the mold is opened to demould the finished product.

⑤ Push parts, including push rod, push tube, push block, push plate, push ring, push rod fixed plate, push plate, etc., are used for demoulding of finished products. Injection molds mostly adopt the acceptance specification mold base, which is a combination of a set of basic parts with standardized structure, form and size, and its cavity can be processed according to the shape of the finished product. The acceptance of standard mold base is conducive to shortening the molding cycle.


Advantages of common mold base parts

Fixed mold base plate (panel): fix the front mold on the injection molding machine.

Runner plate (nozzle plate): remove the waste handle when opening the mold to make it fall off automatically (three plate mold).

Fixed mold fixed plate (a plate): one side of the front mold of the formed product.

Moving die fixing plate (B plate): one side of the rear die of the formed product.

Cushion block: mold foot, which has the advantage that the top plate has enough bearing space.

Push plate: when opening the mold, push the product out of the mold through ejector pin, ejector block, inclined ejector and other push parts.

Movable mold base plate (bottom plate): fix the rear mold on the injection molding machine.

Guide post and guide sleeve: play the role of guiding and positioning, and help the opening, coordination and basic positioning of the front and rear molds.

Support column (support head): improve the strength of B plate, which is conducive to avoiding the deformation of B plate due to long-term production.

Top plate guide post (medium TOS): guide and position the push plate to ensure smooth ejection.

Copyright: Shenzhen Zhongyuan Plastic Co., Ltd. | mold processing customized manufacturer. If you want to know the processing price of the factory, how much is it, and which is good, please contact us Yue ICP Bei No. 17060480
在线精品免费视频无码的| 亚洲AV无码专区色爱天堂| 亚洲国产精品特色大片观看完整版| 给我免费的视频在线观看| 国产午夜精品一区二区三区漫画| 丰满大爆乳波霸奶| 亚洲欧美乱综合图片区小说区| 欧美成人精品第一区二区三区| v与子敌伦刺激对白播放| 国产在线 | 日韩| 亚洲精品午夜无码专区| 床震吃奶摸下成人a片在线观看| 国产精品福利一区二区| 自拍偷在线精品自拍偷无码专区| 欧美人与动性xxxxx杂性| 在线观看的资源视频| 野の欲求不満な人妻在线| 日日噜噜夜夜狠狠久久人人| 国产又黄又爽又猛免费视频播放| 九九精品99久久久香蕉| 被三个男人绑着躁我好爽视频| √天堂资源在线官网| 爱的色放在线观看| 中文字幕无码乱人伦| 同学的妺妺2在线观看| 亚洲中文字幕无码av永久| 99re8在这里只有精品2| 久久婷婷五月国产色综合| 又湿又紧又大又爽又A视频| 欧美亚洲日韩国产区一| 人妻少妇伦在线无码| 精品无码国产自产在线观看水浒传| 国产成人精品一区二三区| 亚洲AV色香蕉一区二区| 日韩99在线 | 中文| 亚洲第一网色综合久久红第一| cao死你好紧好爽好湿视频男男 | 亚洲 欧美 动漫 少妇 自拍| 免费 成 人 黄 色 在线观看| 精品国产不卡一区二区三区| 国产精品久久久久久影视|